- HITEC 4 - HiTECH IVCR2 controller
- Jog knob type for easy programming. LED eight segments
display up to 30 steps 16 segment programming. User can
remotely program and monitor the oven with our WBRMS (Web
Base Remote Maintenance System).
DH-410/610 series
|
 |
- VS 3/4 controller
- The latest microprocessor loaded with the most advanced
features in the market. VS Microprocessor Temperature Controller
series meet all the requirements in your laboratory. VS4
lets you set and customize the conditions and parameters
of programming up to 30 steps based on your needs.
DX,DKN,IC and ADPseries
|
 VS3 |
- Operation capabilities
- Up to 30 steps are programmable. Auto start, auto stop,
ramps and soak, quick auto stop/start, repeat program,
fixed temperature program.
- Safety features
- Dual over temperature protection, temperature sensor
error, heater error, and memory error.
VS3-DX and ADP series
VS4- DKN, DVS series
|
PID controller functions
quick chart
| |
Hitech IV CR2 |
Hitech IV CR3 |
VS-3 |
VS-4 |
| Fix temperature |
Y |
Y |
Y |
Y |
| Auto start/stop |
Y |
Y |
Y |
Y |
| Quick auto stop |
N |
N |
Y |
Y |
| Ramp |
Y |
Y |
N |
Y |
| Soak |
Y |
Y |
N |
Y |
| Repeat |
Y |
Y |
N |
Y |
Y=Yes N=Not available |
|
Quick Chart for Oven Selection
| Category |
Model No. |
Capacity
(cu. ft) |
Internal dimention |
Voltage |
Operating temperature |
| Gravity Ovens |
DVS400 |
2.7 |
17.7×16.9×15.7in |
115 |
Ambient +5°C to 260°C |
| DVS600 |
5.6 |
23.6×20.9×19.7in |
115 |
Ambient +5°C to 260°C |
| DX300 |
0.9 |
11.8×12.2×11.8 in |
115 |
Ambient +5°C to 300°C |
| DX400 |
2.6 |
17.7×16.1×15.7 in |
115 |
Ambient +5°C to 300°C |
| DX600 |
5.4 |
23.6×20.0×19.7 in |
115 |
Ambient +5°C to 280°C |
| Forced Air Ovens |
DKN400 |
2.5 |
17.7x15.7x15.7 in |
115 |
Ambient +5°C to 260°C |
| DKN600 |
5.3 |
23.6x19.7x19.7in |
115 |
Ambient +5°C to 260°C |
| DKN810 |
10.7 |
23.6X20.1x39.4 in |
220 |
Ambient +5°C to 260°C |
| DKN900 |
18.5 |
42.1x19.7x39.4in |
220 |
Ambient +5°C to 210°C |
| DH410 |
3.2 |
17.7"×17.7"×17.7in |
220 |
Ambient +5°C to 360°C |
| DH610 |
7.6 |
23.6"×23.6"×23.6in |
220 |
Ambient +5°C to 360°C |
| DNE810 |
10.6 |
27x22.7x45 |
220 |
Ambient +10°C to 210 °C |
| DNE910 |
18.9 |
49.5x22.7x45.4 |
220 |
Ambient +10°C to 210 °C |
| DNF810 |
10.6 |
27x22.7x45 |
220 |
Ambient +10°C to 260 °C |
| DNF910 |
18.9 |
49.5x22.7x45.4 |
220 |
Ambient +10°C to 260 °C |
| Vacuum Ovens |
ADP21 |
0.35 |
7.9 x 9.8 ×7.9in |
115 |
Ambient +5°C to 240°C |
| ADP31 |
1 |
11.8 ×11.8 ×11.8in |
115 |
Ambient +5°C to 240°C |
| DP43 |
3.2 |
17.7"×17.7"×17.7 in |
220 |
Ambient +5°C to 200°C |
| DP63 |
7.6 |
23.6"×23.6"×23.6 in |
220 |
Ambient +5°C to 200°C |
| DP103 |
35 |
39×39×39 in |
220 |
Ambient +5°C to 200°C |
| Inert Gas Ovens |
DN410I |
3.3 |
18.5x17.7x17.7 |
200 |
Ambient +10C to 360C |
| DN610I |
7.8 |
24.4x23.6x23.6 |
200 |
Ambient +10C to 360C |
| Clean Room Ovens |
DE410 |
3.2 |
17.7"×17.7"×17.7" |
220 |
Ambient +5°C to 260°C |
| DE610 |
7.6 |
23.6"×23.6"×23.6" |
220 |
Ambient +5°C to 260°C |
|
|
Quick Chart for Incubator
Selection
| Category |
Model No. |
Capacity
(cu. ft) |
Internal dimention |
Voltage |
Operating temperature |
| General Incubators |
IC100 |
1.11 |
15.9x13.6x13.6 |
115 |
Ambient +5°C to 60°C |
| IC100W |
1.11 |
15.9x13.6x13.6 |
115 |
Ambient +5°C to 60°C |
| IC400 |
2.6 |
17.7×16.1×15.7 in |
115 |
Ambient +5°C to 60°C |
| IC600 |
5.4 |
23.6×20.0×19.7 in |
115 |
Ambient +5°C to 60°C |
| IC800 |
10.8 |
23.6×20.1×39.4 in |
115 |
Ambient +5°C to 60°C |
| Low Temperature |
IL601 |
|
27.2x24x22.7 |
115 |
4°C to +50°C |
| IL701 |
|
27.2x24x22.7 |
115 |
0°C to 50°C |
Programable
Low Temperature
(Forced air) |
IN602 |
5.3 |
27.2x21.6x22.7 |
115 |
-10°C to +50°C |
| IN602W |
5.3 |
27.2x21.6x22.8 |
115 |
-10°C to +50°C |
| IN802 |
10.6 |
20.4x20.4x40.9 |
115 |
-10°C to +50°C |
|
|
PID
controller chart