Ciencia innovadora por más de 130 años.

Solicitar un formulario de cotización

Refurbished Cold Trap

CA800 – Cold Trap

A worry-free system that efficiently traps water vapor and toxic substances to protect vacuum pumps.

Capacidad: 4L
Rango de temperatura:
Room temp. - 80˚C
Fuente de alimentación: 115V

Refurbished Cold Trap

CA800 – Cold Trap

A worry-free system that efficiently traps water vapor and toxic substances to protect vacuum pumps.

Capacidad: 4L
Rango de temperatura:
Room temp. - 80˚C
Fuente de alimentación: 115V

Secador de pulverización de granulación versátil Yamato GB210B



The Yamato GB210B spray drying granulator incorporates outstanding fluid bed drying technology made for sophisticated granulation of powder and drying of wet powder. Our GB210B Versatile Granulation Spray Dryer is a combination of the basic unit GB210 and the GF200 pulvis mini-bed attachment. In addition, this versatile granulating unit can be used for spray drying by installing the mini spray attachment GF300.


  • Conditions such as hot air temperature, air amount, binder liquid flow amount can be set easily with the setting dial on the front of the spray dryer unit
  • La cámara está hecha de vidrio ultraduro y el usuario puede observar el estado del lecho fluido o el estado de pulverización.
  • El medidor de flujo, el medidor de presión de pulverización y el indicador de temperatura de entrada / salida de la cámara son útiles para la evaluación de datos
  • La unidad también se puede utilizar para el secado por pulverización instalando el accesorio de pulverización mini GF300 (opcional)
  • Equipado de manera estándar con elevador automático para permitir la instalación o extracción conveniente de la cámara de vidrio
Adquiera el mejor secador por atomización para su aplicación a través de una evaluación de muestra adecuada. Descargue nuestro "Determinación de la muestra para la guía de secado por pulverización" and get a hold on:
  • Guide questions on properly evaluating your samples.
  • Information on identifying the spray drying unit compatible with your feed formula.
  • A feature-by-feature product comparison of Yamato’s full line of spray drying equipment.
  • Information on how you can get free spray dryer consultations.

Temperatura. rango de ajuste de la unidad de ajuste40 a 220 ° C (temperatura de entrada), 0 a 98 ° C (temperatura de salida)
Precisión de ajuste de temperaturaTemperatura de entrada ± 1 ° C
Sistema de pulverizaciónBoquilla de dos vías, boquilla No. 1A como estándar
Rango de ajuste de la cantidad de aire de secado0 a 0.7 m³ / min
Rango de ajuste de presión de aire de pulverización0 a 0.3 MPa
Rango de caudal de la bomba de envío de líquido0 a 26 ml / min
Salida externaTemperatura de entrada, temperatura de salida, temperatura de salida (4-20 mA)
Ascensor automáticoDesplazamiento hacia arriba / hacia abajo del elevador automático de la cámara de vidrio
Dispositivo de ajuste de temperaturaPID digital
Panel táctilSoplador, calentador, bomba de envío de líquido, interruptor de chorro de pulso, pantalla de error
Interruptor de selección de controlTemperatura de entrada, interruptor de control de temperatura de salida (el control de temperatura de salida es condicional)
Sensor de temperaturaTermopar K
Calentador2,0 kW (a 200 V) a 2,88 kW (a 240 V)
Bomba de envío de líquidoCantidad fija bomba peristáltica
Bomba de aire de pulverizaciónSe utiliza el compresor de aire de pulverización (se vende por separado).
Servicio de salidaPara agitador: AC100V, máx. 2A
Soplador de succiónVentilador de derivación, motor DC sin escobillas
FiltrarFiltro de succión, filtro de escape.
Boquilla de pulverización mecanismo de enfriamientoConector: boquilla x 2, OD: ø10.5 mm
Diámetro de conexión de aire de pulverizaciónDiámetro del pezón: ø7 mm
Diámetro de conexión de escapeø50 mm
Función de seguridadSobrecalentamiento de la temperatura de entrada / salida, mecanismo de rotación inversa de alimentación de muestra, disyuntor de fuga eléctrica por sobrecorriente, error de conexión de la boquilla
Dimensión externa WxDxH760 x 420 x 1350 mm
Peso~ 110 kg
Fuente de alimentación (50/60 Hz) corriente nominalAC220V 17A AC240V 18A Cambio de terminales necesario
Accesorios incluidosTubo de silicio (con un tapón) x 3, tubo de tiron (con un tapón) x 2, conducto de escape (con una banda de manguera) x 1, sensor de temperatura de salida, tubo de aire de pulverización, caja de muestra, tierra de eliminación de electricidad estática, manguera trenzada de teflón 5 m (con dos bandas de manguera), una mesa contenedor

Spray Dryers

Spray drying equipment has improved over the years. Today, you can process products from milk powder to antibiotics using spray dryers. Yamato’s spray dryer models are suitable for experimental and R&D purposes. You can use our spray dryers for drying, fine powdering, powder mixing, agglomerating, encapsulating, and englobing.

Commercial Food Products

Spray dryers were used widely during the Second World War to produce milk powder. Hence, it is no surprise that the largest market for lab spray dryers nowadays is in the food industry particularly in powdered milk and instant coffee production.

From milk production, the use of spray drying technology has extended to the production of powdered varieties of coffee, algae, gum arabic, protein hydrolysates, yeast extract, starches, and non-dairy creamers to name a few.

You can now rapidly create agglomerates or powder from liquids such as emulsions, suspensions, and solutions since spray dryers are fully-automated and continuous. Moreover, spray drying equipment such as the ADL311SA—a Compact & Economical Spray Dryer by Yamato—are highly suitable for drying both heat-resistant and heat-sensitive foods, allowing shorter residence time with no oxidation and minimal moisture remaining.

Spray drying is also used for encapsulating active substances, homogenizing these into slurries or emulsions before drying. By encapsulating food products, you get to protect your product from heat degradation and therefore improve final product functionality.

Pharmaceutical Products

Not all medical dosages are soluble. Hence, spray drying technology affords the pharmaceutical industry an economical and fast alternative to converting liquid feed into powdered medications and additives such as extracts, infusions, inorganic medicinal salts, vitamin C, and adrenaline.

Since the 1940s, the use of spray drying equipment in pharmaceuticals has advanced from simple drying methods to sophisticated processes such as the production of excipients like ointment bases and preservatives and the isolation of active ingredients that are either hard-to-crystallize or heat-sensitive.

Needless to say, spray drying is an ideal process for those requiring precise attributes especially in the morphology, stability, and particle size of your pharmaceutical products.

In just a single continuous process, you get to convert liquid feedstock into a well-defined powder and get desired properties including precise residual solvent, moisture level, particle morphology, as well as density and size of particulates, which is crucial in the pharmaceutical industry. With high-performance spray dryers like the Yamato DL410 Large Capacity Spray Dryer, you can produce fine particles with sizes from 10 to 100 micrometers, which are considered by many to be difficult to achieve.

Furthermore, you are guaranteed a contaminant free powder with minimal moisture and zero oxidation, so you can guarantee patrons that your products are safe.

Industrial Products

Aside from food and pharmaceutical production, spray dryers are essential for the industrial creation of powdered materials such as catalyst supports, ceramic materials, microalgae, detergents, and paint pigments.

Used, basically, for encapsulation by most industries, applications of spray drying equipment in an industrial setting includes the production of not just powders but also textiles, adhesives, pesticides, carbonless copy paper, and anti-corrosive coatings just to mention a few. The microencapsulation technique involves the use of coatings such as polyvinyl alcohol, sodium alginate, starch, and gelatin.

By encapsulating, you get to reap numerous benefits; one is an extended shelf life for your product and another is increased stability. On the other hand, you also get to decrease the evaporation of the volatile core in products such as paints and pesticides. Aside from those, you also get to reduce oxygenation, prevent a chemical reaction, and improve handling properties of adhesives.

Now, if you are spraying acidic samples for either aqueous or organic solvent, before exhausting to environment or recirculating to the GAS410 Solvent Recovery Unit, we recommend using the GWS410 Organic Solvent Washing Unit to neutralize the air or gas which contains acidic ingredients.

40 years as a leading scientific lab equipment provider in the United States.
Todos los productos tienen una garantía de 1 año.
Cada producto se fabrica a través de métodos respetuosos con el medio ambiente y sigue siendo ecológico durante todo su ciclo de vida.