Innovating science for over 130 years
Type 1 Ultrapure Analytical Low TOC Water Purification System
WC Series: WC301UVB / 311UVB / 301UVR / 311UVR
|Made in USA||Low-cost of Ownership||Compact design||Quick change, cartridge – no tools needed|
2.5 LPM* of 18 MΩ Type 1 reagent water on demand
Intuitive, user-friendly touch screen interface
Real time quality monitoring with leak detection
Premium quality ion exchange resin
Large capacity, low cost consumable cartridges
Replacement cartridges are fresh and made in the USA. 1 year shelf life.
Water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals, and ultraviolet light for bacteria sterilization and TOC reduction. As water exits the system, a final filter removes particulates and bacteria to reach Type I water specifications.
High Performance Liquid Chromatography (HPLC)
Gas Chromatography Mass Spectrometry (GC/MS)
Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
Analytic Chemistry / Trace Organics
WC Series Configuration
- Conditioning cartridge
- Polishing cartridge
- UV oxidation
- 0.2 micron filter
|Bacteria*||< 1 cfu/ml|
|Particulates*||< 0.2 μm filtration|
|TOC*||< 5 ppb|
|Temperature||100˚F / 30˚C|
|Pressure||90 PSIG Max. / 20 PSIG Min.|
|Flow rate (typical)||0.67 Gallons Per Minute / 2.5 Liters Per Minute
< 2.0 LPM with Ultrafilter & Endotoxin filter installed
|Inlet connection||3/8” O.D. Tubing / 9.53 mm O.D. Tubing|
|Dimensions (H x W x D)||21.6 in. x 14.7 in. x 14.4 in. (54.8 cm x 37 cm x 36.5 cm)|
|Weight||42 lbs. dry / 47 lbs. operating (22.7 kg dry / 25 kg operating)|
|Power requirements||120V, 60 Hz @ 1.0 amp / 220V, 50 Hz @ 0.5 amp|
* Performance based upon RO / DI or Distillation Feed (< 20 uS/cm, < 50 ppb of TOC, 0.2 micron filtration)
Lab Water Purifiers
Solutions are sensitive to contaminants, so any imbalance in the mixture invalidates the results of your experiment. Impure water contains contaminants that pose risks. As a result, water should undergo a purification process to reach a certain level of purity. Our lab water purifiers here at Yamato can help you produce ASTM Type 1, Type 2, and Type 3 water quality. Besides that, our lab water purifiers can help you with the following applications:
Buffers and reagents
A buffer corrects the pH level of any solution. On the other hand, a reagent stimulates a reaction to detect the absence or presence of other substances. Both solutions are prepared by dissolving solid reagents in pure water that are free from any substances that affect the acidity or pH level of the solutions.
Since water is a major solvent involved in creating these solutions, a deionized water system for laboratories is necessary to produce water with high levels of purity. The Yamato Auto Pure WA300 series water purifiers can remove dissolved minerals through high-purity ion exchange resins to process high-quality pure water, which is ideal for preparing both solutions.
Normal water contains compounds that affect cell culture which includes bacteria, endotoxin, organic ions, and organic compounds. These contaminants can cause chemical reactions, changes in pH levels, and disrupt or kill various cells.
Moreover, water is also used in producing buffers and rinsing bioreactors and other materials. Therefore, producing laboratory grade water is necessary. This is usually achieved using Yamato Auto Pure WB300 series water purifiers. These units are great in removing bacteria and particulates to reach type 1 water quality, the highest level of purity in water.
In order to make Type 1 or Type 2 water, feed water quality is important. Reverse osmosis is used as pretreatment of raw water just before feeding it to water purifiers which can produce Type1 or Type 2 water.
Traditional method of producing purified water is distillation, which is the process of separating liquid mixtures through condensation. Academia and certain applications require the heat treated distilled water. Yamato Auto Still series water purifiers can produce distilled water.